Showing posts with label Cellulose Insulation. Show all posts
Showing posts with label Cellulose Insulation. Show all posts

Tuesday, 30 June 2015

What Types Of Insulation Are There?



WALLTITE Insulation being sprayed - spray foam insulation
There are many types of insulation products and options available, all with competing claims, making it a challenge to sort the facts from the advertising. There’s also no shortage of self-proclaimed experts ready to weigh in on what they believe is the best insulation system.

While there are a large number of materials that could be used to insulate a home, the most used forms of insulation on the market today are:

Cellulose
Fiberglass
Spray Foam
Cotton / Denim


Cellulose

Cellulose insulation has been a tried and true method of insulating homes for decades. It is made from recycled newsprint and other recycled paper with one of the highest percentages of post-consumer waste content of any insulation. It is treated with recognized safe fire retardants. Numerous tests have shown that cellulose insulation is better at preventing the spread of fire in a building than other insulation products.

Its excellent sound insulating properties, its ability to provide an effective 1-hour fire rating, high R-value per inch, and industry leading environmental properties, makes cellulose insulation a perfect choice for insulating attics and sidewalls.

Cellulose insulation is blown onto attic floors or into wall and ceiling cavities, or is sprayed into open wall cavities. It is an excellent choice for adding insulation in walls of older existing homes due to the ease of installation.


Fiberglass

Fiberglass insulation is made from molten glass that is spun or blown into fibers. The recycled content of fiberglass insulation ranges from 0-40%, but that includes waste generated during manufacturing. Its most common forms are rolls and batts, which are used in wall cavities and attics and also in a loose-fill form that is blown-in.

Fiberglass is non-combustible, but it will melt in a fire, potentially allowing that fire to spread. Care should be taken when installing fiberglass to wear protective clothing and a respirator, per the manufacturer’s guidelines, to avoid direct contact with, or inhaling of, the glass fibers.


Spray Foam

Spray foam insulations are petroleum-based products and typically have little or no recycled content. They require professional installation, using special equipment to measure, mix, and spray the foam. Due to their ability to help reduce air leaks, they are often used in selected areas where the reduction of air leaks is critical, although it can be used throughout a structure. The cost to insulate using spray foam is typically significantly higher than other materials. Excess sprayed foam insulation from the job site can’t be reused, nor can it be recycled.


Bio-Based Foams

Ingredients derived from soy or castor beans are being added to some foam products in an attempt to produce a less environmentally harmful product. They also require professional installation and provide similar air leak reduction as standard spray foam insulations. According to Environmental Building News, these products contain approximately 40% bio-based ingredients and 60% petroleum derived products. It should also be noted that petroleum is used to drive the farm equipment and to produce the agri-chemicals used to grow beans.


Cotton / Denim

Another high recycled and more unusual product is recycled denim insulation. The insulation is primarily made with pre-consumer recycled cotton or denim waste collected from factories manufacturing jeans and other denim products. There are now some with programs targeting post consumer recycling of jeans and other denim products from consumers.

This product is environmentally friendly as it is made from a rapidly renewable resource. Performance is similar to other insulation batt products. It is easier to install than fiberglass since it does not contain the glass fibers. The cost to insulate cotton/denim is typically significantly higher than other materials and the product is not as readily available to consumers in many areas.

Georgian Insulation Systems is Central Ontario's premium spray foam insulation contractor. We're recommended by leading custom home builders, commercial design/builders, architects, home inspectors and our many customers. We provide Polyurethane Spray foam, Cellulose, Fibreglas, Roxull, Fireproofing, Insulation Removal, concrete slab lifting with injected polyurethane and epoxy crack filling. 

Thursday, 19 February 2015

Blown Cellulose or BIBS Fibreglass? Choosing the Best Insulation For Your Home

Blown Cellulose and BIBS Blown-in Fiberglass (BIBS) are two commonly used insulations types applied in home installations. When selecting insulation for your home, you are making an investment that will give you years of comfort in your home. But what type of insulation should you choose? 

We’ve compared Blown Cellulose and BIBS fibreglass insulations to help you make the best decision for your home.

R-Value


Cellulose insulation has a high R-Value and performs best even under the most demanding of conditions where there extreme differences between inside and outside temperatures. Cellulose has the lowest cost per square foot per R-Value.

The R-Value of fibreglass can change with density, however, unlike batt fiberglass insulation which may leave voids affecting the thermal efficiency, BIBS completely fills the space to ensure that your home is draft-free. BIBS has the highest R-Value rating of R24 in a 2x6 wall.

If you’re not sure what an R-Value is, please check out our blog, "What is an R-Value."

Air Infiltration


Cellulose is an effective choice for sealing your home against air infiltration. With its higher density and ability to seamlessly cover and fill difficult spaces like pipes, electrical wiring and other mechanical areas, you receive an amazing barrier to air flow. Cellulose creates a 100% seamless seal that prevents air infiltration.

Likewise, BIBS fills gaps and voids for thermal efficiency. It completely fills any space, including cathedral ceilings, vaulted ceilings, under floors or any other seemingly difficult area to insulate.

Environmental Impact


Cellouse takes less energy to make than any other insulation material. Since it uses the largest amount of post-consumer recycled content in the industry, it prevents the release of greenhouse gases such as methane. While Cellulose is one of the greenest products on the market, BIBS also has some major environmental benefits.

BIBS contains no formaldehydes and does not support mold growth. It does not settle or separate, corrode pipes or wires, or produce mold or mildew.


Both types of insulation have many benefits, however, they are only effective when installed correctly. Georgian Insulation is one of the few contractors in Central Ontario certified to install BIBS Blown-in Fiberglass, and has more than 20 years experience installing all types of insulation.

Contact us today for a free quote!


Georgian Insulation Systems is Central Ontario's premium spray foam insulation contractor. We're recommended by leading custom home builders, commercial design/builders, architects, home inspectors and our many customers. We provide Polyurethane Spray foam, Cellulose, Fibreglas, Roxull, Fireproofing, Insulation Removal, concrete slab lifting with injected polyurethane and epoxy crack filling.

Wednesday, 31 December 2014

What Is an R-Value?

If you’re considering renovating your home or adding in new insulation, you have likely come across descriptions using “R-Value.”  But what is an R-Value and what does it mean for your home?



What is an R-Value?


R-Value is the measurement of insulation effectiveness  – a high R-Value means the insulation will be an effective insulator with a high capacity to resist movement of heat. Insulation type and installation can both effect the R-Value rating, so its important to not only choose quality insulation, but also choose an experienced, knowledgeable company to install it, since compression and air spaces can have a huge impact on effectiveness.

The Canada Mortgage and Housing Corporation (CMHC) has listed a table with characteristics of common insulation materials, including their R-Value. Its definitely worth checking out on their site. I have also include a portion of the table below:

r-value comparison insulation


What products have a high R-Value?

We offer a variety of insulation products with high R-Value.  Our cellulose insulation has an R-Value of R 3.8 per inch.  Cellulose is a great insulation choice as the R-Value remains consistent unlike some other insulation types, such as fiberglass, which loose R-Value in extreme temperatures. 

Cellulose has additional benefits aside from a high R-value.  It is an environmentally friendly as it takes less energy to make compared to any other insulation material.  In addition, it is made from recycled newsprint, diverting waste from landfills and prevent the release of greenhouse gases when newspaper decomposes.

It is also a cost-effective choice as it performs well with a 100% seamless seal, helping keep your utility costs low.  Cellulose insulation also has the lowest cost per square foot per R-Value.

Contact us to learn more about cellulose insulation for for a free quote!


Georgian Insulation Systems is Central Ontario's premium spray foam insulation contractor. We're recommended by leading custom home builders, commercial design/builders, architects, home inspectors and our many customers. We provide Polyurethane Spray foam, Cellulose, Fibreglas, Roxull, Fireproofing, Insulation Removal, concrete slab lifting with injected polyurethane and epoxy crack filling. Contact Us for a Free Quote - Or Call 1-866-576-9338.

Tuesday, 20 May 2014

Go GREEN with Blown Cellulose Insulation - here's why...

Cellulose insulation is one of the greenest products on the market today and will allow you to make a positive contribution to the environment without sacrificing performance.

Save money on utility bills and keep your family warm and comfortable, safe in the knowledge you have made the smart choice. Cellulose insulation can be blown into your attic or cathedral ceiling and injected into wall cavities.

Getting the Value for your Money... cellulose has the lowest cost per square foot per R-Value

Everyone knows that properly insulating a house or building will save on utility costs. But not all insulations are created equal. Cellulose insulation performs best even under the most demanding of conditions where there are extreme differences between inside and outside temperatures.

When comparing the price of cellulose to other products, it is important to compare the extra benefits, such as sound insulation and the environmental benefits. Cellulose Insulation has the lowest cost per square foot per R-Value.

When Cellulose is used, it creates a 100% seamless seal, which makes a home up to 36% tighter than fiberglass. With its higher density and ability to seamlessly cover and fill those difficult spaces like pipes, electrical wiring and other mechanical areas, you are getting an excellent barrier to air flow, excellent sound insulation and excellent insulating properties even in the most difficult environments.

“Going Green” is about Facts...

Cellulose takes less energy to make than any other insulation material.

These are the key “Green” facts about Cellulose insulation. Don’t be fooled into thinking that all products are “green” just because they say they are - check the facts.

1. Cellulose has the largest amount of post-consumer recycled content in the industry - up to 85% recycled newspaper. Paper is the largest component of landfills and producing Cellulose insulation diverts waste from the landfills thus saving valuable space.

2. Cellulose takes less energy to make than any other insulation material. In green circles this is known as “embodied energy” which is the energy required to transport raw materials and the energy used to make the final product. Fiberglass, the most widely used insulation, has 10 times more embodied energy than cellulose.

3. Making cellulose insulation from newsprint prevents the release of greenhouse gases such as methane, which is released as newspaper decomposes in landfills.

4. Cellulose insulation has an R–value of R 3.8 per inch, this R-value remains consistent. Unlike fiberglass insulation which actually looses R value in extreme temperatures, resulting in the least performance when you need it the most.

Georgian Insulation Systems, the areas leading insulation contractor will work with you to achieve the highest level of efficiency in your home.  Call us for a free estimate on your project.

1-866-576-9338


Tuesday, 22 October 2013

Learn the "Green” facts about Cellulose insulation


Cellulose insulation is one of the greenest products on the market today and will allow you to make a positive contribution to the environment without sacrificing performance. Save money on utility bills and keep your family warm and comfortable, safe in the knowledge you have made the smart choice. Cellulose insulation can be blown into your attic or cathedral ceiling and injected into wall cavities.

Everyone knows that properly insulating a house or building will save on utility costs. But not all insulations are created equal. Cellulose insulation performs best even under the most demanding of conditions where there are extreme differences between inside and outside temperatures.

When comparing the price of cellulose to other products, it is important to compare the extra benefits, such as sound insulation and the environmental benefits. Cellulose Insulation has the lowest cost per square foot per R-Value.

When Cellulose is used, it creates a 100% seamless seal, which makes a home up to 36% tighter than fiberglass. With its higher density and ability to seamlessly cover and fill those difficult spaces like pipes, electrical wiring and other mechanical areas, you are getting an excellent barrier to air flow, excellent sound insulation and excellent insulating properties even in the most difficult environments.

These are the key “Green” facts about Cellulose insulation. Don’t be fooled into thinking that all products are “green” just because they say they are - check the facts.

1. Cellulose has the largest amount of post-consumer recycled content in the industry - up to 85% recycled newspaper. Paper is the largest component of landfills and producing Cellulose insulation diverts waste from the landfills thus saving valuable space.

2. Cellulose takes less energy to make than any other insulation material. In green circles this is known as “embodied energy” which is the energy required to transport raw materials and the energy used to make the final product. Fiberglass, the most widely used insulation, has 10 times more embodied energy than cellulose.
 
3. Making cellulose insulation from newsprint prevents the release of greenhouse gases such as methane, which is released as newspaper decomposes in landfills.
 
4. Cellulose insulation has an R–value of R 3.8 per inch, this R-value remains consistent. Unlike fiberglass insulation which actually looses R value in extreme temperatures, resulting in the least performance when you need it the most.

"Blown Cellulose Insulation is simply the best choice for your attic".


Georgian Insulation is based in OroMedonte. We cover all regions in Simcoe County, Muskoka, Haliburton, Dufferin, North York, Grey and Bruce.

Contact Us for a Free Quote - Call 1-866-576-9338